caterpillar 320b-s6k-Cylinder Block
Model NO.: 125-2964 (CAT320B/S6K )
Bucket Capacity: >1.5m³
Condition: New
Delivery Time: 3-5 Working Days
Trademark: CATERPILLAR
Type: Wheel Excavator
Bucket: Grab Shovel
Drive Type: Electric Drive
Size: Medium-Sized
Material: Cast Iron
Transport Package: Nature Packing with Wooden Box
HS Code: 8409919990
the connecting rod small end bushing,caterpillar 320b connecting rod bushing,caterpillar 320b connecting rod bearing,caterpillar 320b
(4) the ,caterpillar 320b-s6k-Cylinder Block bearings were burned to death. If the impeller and water seal are removed, the ,caterpillar 320b-s6k-Cylinder Block rotor can not be moved by hand, that is, the bearing is burned to death. New bearings should be replaced.(5) the wear of ,caterpillar 320b-s6k-Cylinder Block bearings is serious (loosening). When electrified, the rotor of the ,caterpillar 320b-s6k-Cylinder Block is absorbed by the magnetic force on the core of the stator coil, and the rotor can not be rotated. The bearing should be replaced.(6) ,caterpillar 320b-s6k-Cylinder Block bearing wear loose ,caterpillar 320b-s6k-Cylinder Block around the rotor sucked symptoms. The cushion should be added at the bearing ,caterpillar 320b-s6k-Cylinder Block (such as the skin of the can, etc.). It is necessary to use electric welding to fill the shaft when necessary, and then to the standard of the car.(7) the loosening (displacement) of the stator coil of the ,caterpillar 320b-s6k-Cylinder Block should be reduced and strengthened.(8) the mechanical water seal is dead, which causes the ,caterpillar 320b-s6k-Cylinder Block to be unable to start. A new water seal should be replaced.(9) the connecting bolt between the pump body and the ,caterpillar 320b-s6k-Cylinder Block is loose, causing the edge of the impeller. The pump body should be adjusted to tighten the bolt.(10) the pump body side because frozen bulge outwards caused by increased water absorption cavity. The side cover should be replaced.